Navegando por
Etiqueta: raspberry

2ND STEP TO CREATE A TCP CLIENT ON A TOUCHBERRY PI 3. CREATING A TCP CLIENT USING NODE.JS

2ND STEP TO CREATE A TCP CLIENT ON A TOUCHBERRY PI 3. CREATING A TCP CLIENT USING NODE.JS

On this post it showed how to implement a TCP server on Touchberry Pi 3 The requirements of this post is just a Touchberry Pi with internet connection. To get the Node.js JavaScript interpreter we need to install the command cURL on our Linux. cURL command is  very useful for HTTP/S requests. To get the cURL we just need to type on the Linux Terminal: sudo apt-get install curl   Once there is the cURL installed we can download the node source typing…

Leer más Leer más

Serial Communication between Raspberry and MDuino/Ardbox

Serial Communication between Raspberry and MDuino/Ardbox

In this post it will be shown how to communicate using the serial between a MDuino/Ardbox and a Raspberry Pi. It actually exists many ways on communicating between this two devices, but today we will focus on see how to do it using the Serial. Serial communication is actually one of the easiest way to communicate. It only uses two wires to achieve that, Rx & Tx. One wire is to send(Tx) and the other is for receiving(Rx). To stablish…

Leer más Leer más

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

In this post it will be shown how it is set an static ip for the Raspberry. By default the Raspberry Pi is automatically set to obtain an IP address from a wired or wireless network. Then why do we want an static IP if the Raspberry automatically sets already one? The answer is because we need to have the same exact IP, not an automatic one. The reason of being automatic makes that the IP can be different each…

Leer más Leer más