Navegando por
Etiqueta: interface

Serial Communication between Raspberry and MDuino/Ardbox

Serial Communication between Raspberry and MDuino/Ardbox

In this post it will be shown how to communicate using the serial between a MDuino/Ardbox and a Raspberry Pi. It actually exists many ways on communicating between this two devices, but today we will focus on see how to do it using the Serial. Serial communication is actually one of the easiest way to communicate. It only uses two wires to achieve that, Rx & Tx. One wire is to send(Tx) and the other is for receiving(Rx). To stablish…

Leer más Leer más

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

In this post it will be shown how it is set an static ip for the Raspberry. By default the Raspberry Pi is automatically set to obtain an IP address from a wired or wireless network. Then why do we want an static IP if the Raspberry automatically sets already one? The answer is because we need to have the same exact IP, not an automatic one. The reason of being automatic makes that the IP can be different each…

Leer más Leer más