Browsed by
Categoría: Panel PC

Panel PC blog information

BananaTouch 10.1″ TECHNICAL SPECIFICATIONS

BananaTouch 10.1″ TECHNICAL SPECIFICATIONS

On this post it is showed the technical specifications for BananaTouch 10.1″.  Panel PC based on Banana Pi board, encasing  a 10.1” resistive Touch Screen for industrial environment using Linux, Android or  Windows 10 IoT OSs. Board Banana Pi M64 Raspberry Pi M3 CPU 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor A83T ARM Cortex-A7 octa-core,512 KB L1 cache 1 MB L2 cache GPU MAIL-400 MP2 @ 500 MHz PowerVR SGX544MP1·Comply with OprnGL ES 2.0, OpenCL 1.x, DX 9_3 Memory…

Leer más Leer más

HummTouch 10.1″ Technical Specifications

HummTouch 10.1″ Technical Specifications

On this post it is showed the technical specifications for HummTouch 10.1″.  Panel PC based on HummingBoard, incorporating a 10.1” resistive Touch Screen for industrial environment using Linux or Android Operating System. Next it is showed the controller specifications: CPU 64 bit, 1GB @ 800Mbps GPU GC880 USB 2×2.0 USB (1 is used for Touch) Storage SD/ MMC/ SDIO slot (1x 4Gb included) Network Communication 10/100 Ethernet (RJ-45) Wireless Communication – Low level devices 8x GPIO, SPI, I2C, UART OS Linux…

Leer más Leer más

How to install Chromium on Linux Panel PC

How to install Chromium on Linux Panel PC

In this post is showed how to install chromium on a Linux Panel PC. Our Linux Panel PC’s are Touchberry B3 PI 10.1″, BananaTouch Octacore M3 10.1″, BananaTouch M64 10.1″, TouchBerry Pi B3 7″ IN/OUT and HummTOUCH 10.1″ Linux. From the Panel PC we have to open the terminal and update the apt-get typing:

How to Install and use Rapid SCADA on Touchberry Pi and BananaTouch

How to Install and use Rapid SCADA on Touchberry Pi and BananaTouch

On this post is showed how to install Rapid SCADA on a Touchberry B3 PI 10.1″, BananaTouch Octacore M3 10.1″, BananaTouch M64 10.1″ and TouchBerry Pi B3 7″ IN/OUT. These products use an official Raspberry Pi 3 or an official Banana Pi products. These products have installed a Linux Debian Jessie. So,on this post we will see how to install Rapid SCADA on this OS. Rapid SCADA is free, open source, full featured SCADA software.  This post is divided for…

Leer más Leer más

TCP Server on Touchberry Pi 3 with Node.js

TCP Server on Touchberry Pi 3 with Node.js

On this post it showed how to implement a TCP server on Touchberry Pi 3 The requirements of this post is just a Touchberry Pi with internet connection. To get the Node.js JavaScript interpreter we need to install the command cURL on our Linux. cURL command is  very useful for HTTP/S requests. To get the cURL we just need to type on the Linux Terminal: sudo apt-get install curl

How to install screensaver on Touchberry Pi

How to install screensaver on Touchberry Pi

On this post is showed how to install a screensaver for a Touchberry Pi.  First, uncomment the line “@xscreensaver -no-splash” (removing #) from /home/pi/.config/lxsession/LXDE-pi/autostart. Second, follow these steps: Open the Touchberry Pi Make sure there is internet connection Open the terminal and type: sudo apt-get update sudo apt-get install xscreensaver Wait to finish the installation process. Close the terminal After installation, perform a search in the Dash for Screensaver. Launch the Screensaver utility and use it to configure XScreenSaver and…

Leer más Leer más

SimpleComm library to send data through any Arduino Stream

SimpleComm library to send data through any Arduino Stream

This is Industrial Shields library for different PLC’s   With the SimpleComm library you can send data through any Arduino Stream: RS-485, RS-232, Ethernet… It is enough flexible to support different kind of communication typologies: Ad-hoc, Master-Slave, Client-Server… Using an easy to use API. The SimpleCoom library is included on Tools40 library. Reference: SimplePacket encapsulates the data into a packet and provides these functions: setData(data) Fill up the packet with the desired data to send or the received data from a…

Leer más Leer más