Browsed by
Tag: linux

HOW TO UPLOAD A SKETCH USING ETHERNET.

HOW TO UPLOAD A SKETCH USING ETHERNET.

In this post it will be shown how to proceed in order to upload a sketch using the Ethernet instead of using the tipical Serial (USB). This is really useful in order to upload a sketch being far from the Arduino board. This post is been prepared for upload a code using Linux and using Windows. This process is a bit long and for this reasons it has been divided in the 3 big parts. 1.How to install the Ariadne…

Read More Read More

UPLOADING A SKETCH TO A PLC USING ETHERNET. STEP 3. TFTP CLIENT

UPLOADING A SKETCH TO A PLC USING ETHERNET. STEP 3. TFTP CLIENT

In this post it will be seen how to send the binary file of an sketch into Arduino using Ethernet with tftp Client. Furthermore it is needed to use Telnet in order to do a remote reset. As in the step 2 of this process this post will be divided in two different parts. One for sending the binary file using Windows and the other using Linux.   Windows For sending an sketch using the tftp Client it is need…

Read More Read More

Solar Monitoring System with Ardbox

Solar Monitoring System with Ardbox

Solar panels are popular because they are able to give us energy from light. When the light hits the panel solar conductor, the energy is translated into moving and electrons, creating current. In this newsletter we´ll make a simple monitoring system that you can develop for your home with Open Source Hardware. Hardware Hardware selection depend a lot of your solar panel and its specs (output voltage, power). For this project, we will consider that we have a 5.2 kW…

Read More Read More

Control of soil humidity in an irrigation installation

Control of soil humidity in an irrigation installation

This newsletter is really interesting because control soil humidity in irrigation installations makes saving water, time and money.  Continue reading…   Hardware Hardware selection is very important when you try to develop projects where sensors, actuators and PLC´s must talk each other. For this project, with chosen the following equipment: PLC: Any PLC from IndustrialShields is a good option. We have chosen the M-Duino PLC Arduino 21 I/Os Analog/Digital because we think it has different communication options to be communicated…

Read More Read More

Real time electrical consumption monitoring with M-Duino

Real time electrical consumption monitoring with M-Duino

In this Project, we will show you how to read electrical consumption using Modbus communication. Modbus is an industry standard communications protocol for electronic device Hardware I: Equipment to be used The electrical consumption monitoring system consists of: An M-Duino PLC: This controller is the heart of the system. It controls the display, generates interrupts, and controls the communication. A Panel PC: Used to read on the status of a counter and display the graph of monthly consumption over the Panel…

Read More Read More