Browsed by
Tag: dhcp

Ethernet Configuration from EEPROM using the Commandline

Ethernet Configuration from EEPROM using the Commandline

Requirements CmdLine library https://github.com/IndustrialShields/arduino-CmdLine   Description Configure the Ethernet parameters saved in the EEPROM: MAC address and DHCP/IP address. It is used the EEPROM library to store configuration parameters. The ‘cont_t’ structure defines the parameters that will be saved into the EEPROM: type and name. In this case the parameters are used to save the Ethernet configuration, so it is used also the Ethernet library (Ethernet/Ethernet2). *Ethernet for v7 and Ethernet2 for PLUS version. It is possible to add more…

Read More Read More

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

1st step to create a TCP client on a Touchberry Pi 3. Setting an static IP Address

In this post it will be shown how it is set an static ip for the Raspberry. By default the Raspberry Pi is automatically set to obtain an IP address from a wired or wireless network. Then why do we want an static IP if the Raspberry automatically sets already one? The answer is because we need to have the same exact IP, not an automatic one. The reason of being automatic makes that the IP can be different each…

Read More Read More