M-DUINO 38R I/OS PINOUT

M-DUINO 38R I/OS PINOUT

M-DUINO 38R I/OS PLC has a diferents types of Inputs and Outputs.

It has 34 input/output signals:

  • 12 Inputs, of which:
    • 8 can be used as Analog/Digital Input 0-10Vdc, 10bits,(using Pins A0, A1, A2, A3, A6, A7, A8 , A9). 
    • 4 are Digital Input which can work as a Interrupt Input also. (using Pins 2, 3, 19, 18).
  • 22 Outputs, of which:
    • 16 are Relay Output (Using Pins  22, 23, 24, 25, 27, 28, 29, 30, 37, 38, 39, 40, 42, 43, 44, 45).
    • 6 are Analog Output 0-10Vdc (Using Pins 4, 5, 6, 8, 10, 11), 8bits. All of them can also work as Digital Output and PWM output.

IMPORTANT: To enable communication connections the switches must be set to “OFF”. Set to “ON” position to enable I/Os terminals. Communications and I/Os terminals on the chart can not work simultaneously. For example if Pin 3 is enabled (OFF), I0.6 will not be disabled. See more on Switch Configuration.

A Zone Connection:

Base (common unit)
A Zone
M-DUINO Connector Arduino Pin Function
SCL 21 I2C/SS
SDA 20 I2C/SS
RX0 1 RX0/SS
TX0 0 TX0/SS
RX1 19 RX1/SS
TX1 18 TX1/SS
RX 17 RX2(serial 2)
TX 16 TX2(serial 2)
RX3/RE 15 RX3/RS485/SS
TX3/DE 14 TX3/RS485/SS
A RS485
B RS485
PIN3 3 Arduino Pin/ Select SPI
50 SO 50 SPI
51 SI 51 SPI
52 SCK 52 SPI
RESET RESET SPI
Vin 5 Vin 5 SPI
PIN2 2 Arduino Pin / Select SPI
GND GND
GND GND
24 Vdc    

Base (common unit)
A Zone
M-DUINO Connection Arduino Pin Function
AREF AREF Arduino PIN
IOREF2 IOREF2 Arduino PIN
IOREF1 IOREF1 Arduino PIN
7  Vdc 7  Vdc
GND GND GND
3.3 Vdc 3.3 Vdc Arduino PIN
GND GND GND
5 Vdc 5 Vdc
GND GND GND

A Top Zone:

B Zone 21 I/Os:

B Zone
M-DUINO Connection Arduino Pin Function *
R0.8 37 Relay Out
R0.7 38 Relay Out
R0.6 39 Relay Out
R0.5 40 Relay Out
R0.4 24 Relay Out
A0.2* 6 Analog Out
A0.1* 5 Analog Out
A0.0* 4 Analog Out
GND GND GND 
Q0.2* 6 Digital/PWM Out
Q0.1* 5 Digital/PWM Out
Q0.0* 4 Digital/PWM Out
GNDCOM External Isolated Out Gnd
24VCOM External Isolated Out Vdc

* See Switch Configuration to select suitable switch configuration for (10-24Vdc/An-Dig) configurable I/Os.

B Zone
M-DUINO Connection Arduino Pin Function *
R0.3 25 Relay Out
R0.2 22 Relay Out
R0.1 23 Relay Out
GND GND GND
I0.5 A3 Analog/Digital Input
I0.4 A2 Analog/Digital Input
I0.3 A1 Analog/Digital Input
I0.2 A0 Analog/Digital Input
I0.1 3 Interrupt 1 In
(-)I0.1 GND I0.1
I0.0 2 Interrupt 0 In
(-)I0.0 GND I0.0

* See Switch Configuration to select suitable switch configuration for (10-24Vdc/An-Dig) configurable I/Os.

B Zone top:

 

C Zone 17 I/Os:

C Zone
M-DUINO Connection Arduino Pin Function *
R1.8 42 Relay Out
R1.7 43 Relay Out
R1.6 44 Relay Out
R1.5 45 Relay Out
R1.4 29 Relay Out
A1.2* 11 Analog Out
A1.1* 10 Analog Out
A1.0* 8 Analog Out
GND GND GND 
Q1.2* 11 Digital/PWM Out
Q1.1* 10 Digital/PWM Out
Q1.0* 8 Digital/PWM Out
GNDCOM External Isolated Out Gnd
24VCOM External Isolated Out Vdc

* See Switch Configuration to select suitable switch configuration for (10-24Vdc/An-Dig) configurable I/Os.

C Zone
M-DUINO Connection Arduino Pin Function *
R1.3 30 Relay Out
R1.2 27 Relay Out
R1.1 28 Relay Out
GND GND GND
I1.5 A9 Analog/Digital Input
I1.4 A8 Analog/Digital Input
I1.3 A7  Analog/Digital Input
I1.2 A6 Analog/Digital Input
I1.1 19 Interrupt 4 In
(-)I1.1 GND I1.1
I1.0 18 Interrupt 5 In
(-)I1.0 GND I1.0

* See Switch Configuration to select suitable switch configuration for (10-24Vdc/An-Dig) configurable I/Os.

C Zone top:

See also:

M-DUINO 57R I/OS PINOUT,  M-DUINO 19R I/O PINOUTM-DUINO RELAYM-DUINO RELAY SWITCH CONFIGURATION

Comments are closed.