HummTouch 10.1″ Technical Specifications

HummTouch 10.1″ Technical Specifications

On this post it is showed the technical specifications for HummTouch 10.1″.  Panel PC based on HummingBoard, incorporating a 10.1” resistive Touch Screen for industrial environment using Linux or Android Operating System. Next it is showed the controller specifications:

CPU

64 bit, 1GB @ 800Mbps

GPU

GC880

USB

2×2.0 USB (1 is used for Touch)

Storage

SD/ MMC/ SDIO slot (1x 4Gb included)

Network Communication

10/100 Ethernet (RJ-45)

Wireless Communication

Low level devices

8x GPIO, SPI, I2C, UART

OS

Linux Debian / Andorid

Linux Debian / Andorid

  • This Panel PC is based on GNU/Linux OS or on Android OS installed on a SD card. It has many interfaces built in: Ethernet, USB, UART….Using the Ethernet port network you can remotely control all parameters, data and inputs/outputs of your control system.
  • Furthermore, HummingTouch comprises enough I/Os to replace PLCs on simple automation applications.
  • Open protocols not only allow communication with other Industrial Shields PLCs, but also third-party devices and machinery.
  • In complex systems you can create a network between several HummTouch. Providing integral supervision and control solution for entire production plants and real-time data at hand.

 

General Specifications:

Item

Touch Panel 10.1”

Power supply voltage

DC power supply

   12Vdc

Power consumption

DC power supply

22 VAC max.

External power supply

Power supply voltage

12Vdc

Power supply output capacity

1,5 A (2A BananaTouch)

Shock resistance

80m/s2 in the X, Y and Z direction 2 times each.

Ambient temperature (operating)

0º to 45ºC

Ambient humidity (operating)

10% to 90% (no condensation)

Ambient environment (operating)

With no corrosive gas

Ambient temperature (storage)

-20º to 60ºC

Power supply holding time

2ms min.

Weight

1.250 gr.

 

Touch Screen Specifications:

Item

Touch Screen

Technology

Resistive Multitouch LVDS, 315 nits, 170º viewing angle

Image Resolution

1280 x 720

Format

16:9

Size

10.1”

 

Operating Systems:

 

                 

 

HummTouch Pi I/Os Pinout:

Hummingboard pinout is directly connected to DC-37 female connector:

DC-37

GPIO

01

3Vdc

02

I2C3_SDA // SDA1

03

I2C3_SCL//SCL1

04

USB_OTG_ID // GPIO_GCLK

05

GND

06

DISP1_DATA00 // GPIO_GEN0

07

DISP1_DATA02 // GPIO_GEN2

08

DISP1_DATA03 // GPIO_GEN3

09

3Vdc

10

ECSPI2_MOSI // SPI_MOSI

11

ECSPI2_MISO // SPI_MISO

12

ECSPI2_SCLK // SPI_SCLK

13

GND

14

15

16

17

18

19

20

5Vdc

21

5Vdc

22

GND

23

TXD0

24

RXD0

25

DISP1_DATA01 // GPIO_GEN1

26

GND

27

SD3_CMD // GPIO_GEN4

28

SD3_CLK // SD3_CLK

29

GND

30

DISP1_DATA06 // GPIO_GEN6

31

DISP1_DATA06 // SPI_CE0_N

32

ECSPI2_SS1 // SPI_CE1_N

33

34

35

36

37

38

39

40

 

See also:

HOW TO INSTALL AND USE RAPID SCADA ON TOUCHBERRY PI AND BANANATOUCH

TCP SERVER ON TOUCHBERRY PI 3 WITH NODE.JS

HOW TO INSTALL SCREENSAVER ON TOUCHBERRY PI 

TOUCHBERRY B3 PI 10.1″ TECHNICAL SPECIFICATIONS

Comments are closed.