Ardbox Relay HF Pinout

Ardbox Relay HF Pinout

On this post it is showed the Ardbox Relay HF Pinout. It has 10 inputs, of which 6 can be used as Analog input (using pins A5, A4, A3, A2, A1, A0). All of them can also be used as Digital inputs.

Ardbox Relay HF Pinout:

Communication
Ardbox Connector Arduino Pin Function
 MISO SPI
MOSI SPI
SCK SPI
RESET SPI
5Vdc RS485
GND RS485
RX “Not used”
TX “Not used”
SDA PIN 2 I2C-SS
SCL PIN3 I2C-SS

 

Relay
Ardbox connector Arduino Pin Function
R1* D4 Relay Control
R2* D7 Relay Control
R3 D8 Relay Control
Ardbox right side

 

Relay
Ardbox connector Arduino Pin Function
R4 D9 Relay Control
R5* D10 Relay Control
R6* D11 Relay Control
R7 D12 Relay Control
R8 D13 Relay Control

 

Inputs
Ardbox connector Arduino Pin Function
I0.9 A5 Analog / Digital Input
I0.8 A4 Analog / Digital Input
I0.7 A3 Analog / Digital Input
I0.6 A2 Analog / Digital Input
I0.5 A1 Analog / Digital Input
I0.4 A0 Analog / Digital Input
I0.3 D1 Digital Input
I0.2 D0 Digital Input
I0.1 D3 Digital Input
I0.0 D2 Digital Input

 

Data Transmission
Full-Duplex
Ardbox connector Arduino Pin Function
 B-  *  Receive data
 A+  *  Receive data
 Z-  *  Send data
 Y+  *  Send data
Half-Duplex
 Ardbox connector   Arduino Pin  Function
 B-  *  Send / Receive data
 A+  *  Send / Receive data

*It uses the pins D0(RX), D1(TX), D10 and D11, so look at the switch settings for more information. 

Ardbox left side

See also: Rs-485 Test on Ardbox HF

Comments are closed.